Wickes 223750, Руководство пользователя

Страница: 11 / 20

11
OPERATING INSTRUCTIONS
NOTE:
Before using the tool, read the instruction book carefully.
Intended Use
The machine is intended for sawing wood, plastic, metal and building materials while resting firmly on the workpiece. It
is suitable for straight and curved cuts with bevel angles to 45°. The saw blade recommendations are to be observed.
ASSEMBLY AND ADJUSTING
WARNING: Before any work on the tool itself, remove the battery pack. Wear protective gloves when
assembling the saw blade.
WARNING: Blade teeth are very sharp. For best cutting results ensure you use a blade suited to the
material and cut quality you need.
NOTE: You can only use the blade type shown in Fig. A1. Don’t use other blade types.
- Inserting the saw blade
1) Open the tool-free blade holder by rotating the ring anti-clockwise (jigsaw upside down) and hold it in position. (SEE
FIG. A2).
2) Fully insert the blade into the blade holder slot with blade teeth facing forward. (See Fig. A2)
3) Release the blade holder ring, which will self rotate back to clamp over the top of the blade. Push the blade into the
blade holder again to ensure it is locked in position.
4) Ensure the edge of the blade is located in the groove of the blade guide (SEE FIG. A3).
- Removing the saw blade (See Fig. A4)
To remove a blade, hold the blade and rotate the blade holder ring anti-clockwise (jigsaw upside down), then lift out the
blade (Note that blade could be spring ejected).
1. BLADE FITTING (SEE FIG. A1-A4)
T-type Shank
2
1
Fig. A1 Fig. A2