background image

4

GENERAL POWER TOOL SAFETY WARNINGS

the power tool before making any adjustments, 
changing accessories, or storing power tools. 

Such 

preventive safety measures reduce the risk of starting the 

power tool accidentally. 

d)  Store idle power tools out of the reach of children 

and do not allow persons unfamiliar with the 
power tool or these instructions to operate the 
power tool. 

Power tools are dangerous in the hands of 

untrained users. 

 

e)  Maintain power tools and accessories. Check for 

misalignment or binding of moving parts, breakage 
of parts and any other condition that may affect 
the power tool’s operation. If damaged, have the 
power tool repaired before use. 

Many accidents are 

caused by poorly maintained power tools. 

f)  Keep cutting tools sharp and clean. 

Properly 

maintained cutting tools with sharp cutting edges are less 

likely to bind and are easier to control. 

g)  Use the power tool, accessories and tool bits etc. 

in accordance with these instructions, taking into 
account the working conditions and the work to be 
performed. 

Use of the power tool for operations different 

from those intended could result in a hazardous situation. 

h)  Keep handles and grasping surfaces dry, clean 

and free from oil and grease. 

Slippery handles and 

grasping surfaces do not allow for safe handling and 

control of the tool in unexpected situations. 

5. SERVICE
a)  Have your power tool serviced by a qualified repair 

person using only identical replacement parts. 

This 

will ensure that the safety of the power tool is maintained. 

JIGSAW SAFETY WARNINGS

1.   Hold jigsaw by insulated gripping surfaces, when performing an operation where the cutting accessory may 

contact hidden wiring or its own cord.

 Cutting accessory contacting a “live” wire may make exposed metal parts of the 

power tool “live” and could give the operator an electric shock.

2.  Use clamps or another practical way to secure and support the workpiece to a stable platform. 

Holding the 

workpiece by hand or against your body leaves it unstable and may lead to loss of control.

Содержание 223746

















Отзывы: