Wickes 223722, Руководство пользователя

Страница: 8 / 16

8
OPERATING INSTRUCTIONS
NOTE:
Before using the tool, read the instruction book carefully.
Intended Use
The machine is intended for impact drilling in brick, concrete and stone as well as for drilling in wood, metal and plastic.
Rotate the handgrip counter-clockwise to loosen the
auxiliary handle (7).
Slide the auxiliary handle onto the drill and rotate to the
desired working position. Rotate the handgrip clockwise
to clamp the auxiliary handle (7). Always use the auxiliary
handle (7) in operation.
WARNING! ALWAYS CHECK AND ROTATE THE
HANDLE TIGHTLY BEFORE USING TO AVOID ANY
ACCIDENT.
1. INSTALLING THE AUXILIARY HANDLE (See Fig. A1,A2)
Fig. A1
Fig. A2
The depth gauge (2) can be used to set a constant depth
to drill. To use the depth gauge (2), loosen the bottom
of the handle clockwise, then insert depth gauge (2)
through hole in handle. Slide the depth gauge (2) to
required depth and tighten fully.
Fig. B
2
1
3
2. INSTALLING THE DEPTH GAUGE (See Fig. B)