2- Optional Carbon Fiber Re-Inforcement Kit Installation
Step 1
– If you are installing the optional
Step 2
– Measure 6” out from the fuselage
carbon fiber re-enforcement kit. Glue down the and 1/2” back from the lead edge and
14 1/2” carbon strips on either side of the wing. glue down your wing fences on both
Make sure to use a liberal amount of glue in the sides of the wings. Make sure they
slice in the nose to help stop potential tearing. are parallel to the fuselage.
Step 3
– Locate 4 -13” 1.5mm carbon rods for your wing struts. Lay out the rods on top of the
fuselage and wing as pictured above and mark where they sit on the wing fence.
