Wi-Tek WI-PMS310GF-Alien-I, Быстрый старт

Страница: 9 / 21

WI-PMS310GF-Alien-I QSG Page 9 of 21
8. Configuration
This section covers some tasks that are not fully covered in the User Manual
(see section Introduction, page13).
8.1 Accessing the Configuration Interface
There are two configuration options:
1. Graphical User Interface (GUI), using an Ethernet connection.
2. Command Line Interface (CLI), using a console cable.
8.1.1. Graphical User Interface
For full details, download this document:
http://www.wireless-tek.com/Uploads/download/1583371174.pdf
When in Factory Reset state, the Switch is set to use the default IP address
of
192.168.0.1 .
1. Make sure that your host system is connected via Ethernet
to the Switch.
2. Configure the Ethernet adapter on your host system with a
static IP address in the 192.168.0.x subnet.
e.g. 192.168.0.10
3. Launch your web browser and type
http://192.168.0.1
in the address field. Press enter (PC) or return (Mac).