Antenna Aiming:
To get the maximum benefit, you will want to take special care to point the antenna in the direction of the best signal
for your wireless service provider.
1.
Place your cell phone on a non-metal surface which is 6-8 feet from the Base Unit Antenna.
2.
Turn the signal booster on and wait 30 seconds. Note the number of signal bars displayed on your cell phone.
For best results, you want your phone to display in the middle of the signal meter range or less so that it can
go up as you rotate the Signal Antenna to the optimum direction. If it is reading too high, move the phone
farther from the base unit antenna.
3.
Record the number of signal bars (or range) ________(A) on your cell phone. Leave the phone in the same
place and pointing in the same direction for the following steps.
Note the direction of the antenna starting position_________________________.
4.
Rotate the antenna mast 90 degrees and then record the phone signal bars _________(B).
5.
Continue to rotate the antenna mast another 90 degrees in the same direction and record the phone signal
bars _________(C).
6.
Again, rotate the antenna mast another 90 degrees in the same direction and again record the phone signal
bars _________(D).
7.
Look for the highest reading above. Set the antenna to that position and tighten the antenna mast.
8.
If you desire to optimize further, then look for the two highest signal bar readings above and move the antenna
between these two points to find the highest signal bars reading.
9.
Once you have determined the highest reading position tighten the antenna mast.
You have now completed the Directional Signal Antenna installation.
Specifications:
Frequency
range:
704-787 824-960 1710-1990
2110-2170MHz
Beam Width:
60º
Polarization:
Vertical
Max
Gain:
8dBi
8dBi
10dBi
10±0.5dBi
VSWR:
≤
2.2
Impedance:
75
Ω
Max Power:
100W
Lighting protection:
DC Ground
Connector:
F-female
Temperature:
-30ºC ~+75ºC
Front-To-Back Ratio:
≤
23dB
You may also want to try
our
zBoost Signal Finder
Android App