Pairing
(Only If Needed)
1.
First turn ON the transmitter (Tx) and the
receiver (Rx) units by pressing and
holding the POWER button , on each
of the units for 2 seconds.
2.
Press and hold the LINK button on the
transmitter (Tx) for 3 seconds. The Power/
Status LED on the transmitter will start fast
flashing. The transmitter is now in a Pairing
mode and ready to search for the receiver.
3.
Press and hold the LINK button on the
receiver (Rx) for 3 seconds. The Power/
Status LED on the receiver will start fast
flashing. The receiver is now in a Pairing
mode and ready to be found by the
transmitter.
4.
Once the transmitter links with the receiver
the Power/Status LED on both devices will
turn to solid Green.
p
k
z
v
(Tx)
p
k
z
v
(Rx)
r
