Wi Digital Systems AudioStream Pro SL, Руководство пользователя

Страница: 7 / 50

7
PAIRING
Pairing the Wi Transmitter & Receiver
The Wi Transmitter and Receiver are paired at the factory. Perform the
following steps ONLY if you need to reestablish connection between
the Transmitter and the Receiver.
1. First turn ON the Transmitter (Tx) and the Receiver (Rx) by pressing and
holding the POWER button , on each of the units for 2 seconds.
2. Press and hold the LINK button on the Transmitter (Tx) for 3 seconds.
The Power/Status green LED on the Transmitter will start flashing.
The Transmitter is now in a Pairing mode and ready to search for receivers.
3. Press and hold the LINK button on the Receiver (Rx) for 3 seconds.
The Power/Status green LED on the receiver will flash momentarily.
4. Once the Transmitter pairs with Receiver, the Power/Status LED on both
devices will turn to solid green.
5. The Wi AudioStream Pro SL Transmitter and Receiver are now ready for use.
(Tx)
p
k
z
v
(Rx)
p
k
z
v
r