1/4” mono male connector
Electric Guitar input
Transmitter Connection
1.
Connect the 1/8” stereo male end of the
cable into the “Audio Input” jack on the
transmitter.
2.
Route the audio cable beneath the belt clip
as shown to prevent accidental disconnection
of the cable.
3.
Connect the 1/4” mono male end of the cable
into the electric guitar. Use the 1/4” stereo
cable for digital piano, keyboard or electronic
drums connection.
4.
Power up the transmitter by pressing and
holding the POWER button for 2 seconds.
5.
Please refer to the “Transmitter Button Function Matrix”
section of this Quick Guide for Active Guitars and
Stereo Line-in MODE settings.
6.
Attach the transmitter to your belt.
Alternatively the receiver can be
placed next to the musical instrument.
Belt Clip
Audio Cable
v
Audio Input Jack
1/4” Mono to 1/8” Stereo Cable
(L/MONO)
Musical Instrument
k
(R)
(Tx)
1/4” Y-Split to 1/8”
Stereo Cable
r
r
