Whyte MTB Hardtail Series, Дополнительное руководство по обслуживанию

Страница: 6 / 12

2019 Edition 1 Page 6
WHYTE Service Manual
Quick Release Lever Type: Fig.2
Tools: 4mm allen key.
(Note, refer to the seat-pin manufacturers instructions in conjunction with these notes).
To Adjust the seat height with the QR Lever assembly fitted, simply undo the QR Lever (3)
from the Closed position to the Open position. Next adjust the height of the Seat Post to
the desired level, and close the QR lever (3) from the Open position to the Closed position.
The QR closing force can be adjusted and optimised by turning the QR M5 Adjuster Bolt (6)
clockwise or anti-clockwise with the use of a 4mm allen key before closing the QR Lever
(3).
CAUTION!
When adjusting the saddle height you
MUST
obey the Minimum insertion
depth requirement marked on the Seat Post.
3.3: WHYTE INTER-GRIP SEAT CLAMP
ADJUSTMENT
The Inter Grip 2 seat clamp design is present on several models of Whyte bikes. It allows
adjustment of the saddle height & direction.
Fig.2: Inter-Grip Seat Clamp
Tools Required: 5mm AF Allen Keys (2 off, 1 fitted to a 3Nm to 15Nm Torque Wrench)
CAUTION! Avoid over-tightening the seat clamp.
In particular, “dropper” seat-posts such as SRAM Reverb may not work correctly if the seat
Fig.2: Inter-Grip Seat Clamp
Ite
m
Description
1 Cap-screw, M6 x 30 long
2
Inter-Grip Sleeve, thread-
ed.
3
“O” Ring seal, fits in
sleeve groove.
4
Inter-Grip Sleeve, no
thread.
5
Inter-Grip Pad for
Ø30.9mm seat-post
6 Main Frame
Fig.2: Inter-Grip Seat Clamp