Whyte LC-7 Strawberry Hill, Дополнительное руководство по обслуживанию

Страница: 12 / 21

Page 12
2018 Edition 1
WHYTE Service Manual
CAUTION! Avoid over-tightening the seat clamp.
In particular, “dropper” seat -posts such as SRAM Reverb may not work correctly if the seat
clamp is over tightened.
Figure 3. To adjust the seat height and/or direction, using the 5mm Allen key, undo the M6
Capscrew (1) just enough to allow the Seat Post to slide freely up and down. Set the height
and/or direction to the desired level. Re-tighten the M6 Capscrew (1) with the 5mm Allen
Key in the Torque Wrench to the 6Nm limit, as marked on the Plain Sleeve (4).
If a “dropper” seat -post is fitted, simultaneously depress the activation trigger and press
down on the saddle to compress the seat-post until it is fully down. Then release the activa-
tion trigger and the seat-post should rise up automatically. If this does not happen, gradual-
ly loosen the M6 Capscrew (1) with the 5mm Allen Key below the 6Nm limit, until the seat-
post rises automatically. Then firmly twist the saddle to confirm the seat-post is still secure-
ly gripped by the lowered torque value that allows the “dropper” seat -post to function cor-
rectly.
CAUTION! When adjusting the saddle height you MUST obey the Minimum insertion
depth requirement marked on the Seat Post (7). Also consult the seat-pin manufac-
turers instructions in conjunction with these notes.
3.3: WHYTE GETTA-GRIP SEAT CLAMP ADJUSTMENT
The Getta Grip seat clamp design is a patented design to allow adjustment of the saddle
height by the use of a Quick Release (QR) Lever.
Quick Release Lever Type: Fig.3
Tools: 4mm allen key.
(Note, refer to the seat-pin manufacturers in-
structions in conjunction with these notes).
To Adjust the seat height with the QR Lever assembly fitted, simply undo the QR Lever (3)
Item Description
1
Whyte Seat Clamp Band
2
Plastic Shim
3
Whyte QR Lever
4
T-Pad
5
QR Lever Cam
6
QR M5 Adjuster Bolt
7
Whyte Main Frame
Fig.3: Getta-Grip Seat Clamp: QR Lever