INSTALLATION INSTRUCTIONS
MOUNTING THE LAUNCH AMPLIFIER
Select a suitable location to install the Launch Amplifier. Do not install the
Launch Amplifier in damp, humid, hot or dusty areas. Using the screw slots
on the Corner Brackets, secure the Multiswitch using the appropriate fixing
screws and wall plugs to suit the relevant wall surface or cabinet.
CONNECTING THE SAT & TERR INPUT CABLES
Use a suitably sized Satellite Dish to provide adequate signal levels from the
satellite being received. Ensure that the Satellite Drop Cables are connected
correctly in the corresponding order with respect to the LNB and the Launch
Amplifier SAT inputs. Ensure that the F Connectors are properly sealed
against water ingress.
If a Composite Cable (multi core coaxial cable) has been used, ensure that the
outer jacket is not facing upwards and cannot collect rain water. Check the
Terrestrial Drop Cable and ensure that this has also been sealed against water
ingress.
If a Triplexer has been used to combine the FM and DAB aerials with the
UHF Terrestrial Aerial, ensure that this is also water tight. Ensure that all drop
cables have drip loops prior to their entering the building. Connect the SAT
and TERR drop cables to the corresponding Satellite & TERR Inputs of the
Launch Amplifier.
6
