Whyte 5 Lite Series, Инструкция по эксплуатации

Страница: 6 / 12

www.whytetechnologies.com
6
TECHNICAL DESCRIPTION
Whyte Series 5 Lite Multiswitches are compatible with Quad and Quattro
LNB’s. The inputs are colour coded for ease of installation which is especially
useful when using a Quattro LNB. For convenience, existing satellite dishes
which are already fitted with a Quad LNB may be used, whereby the drop
cables can be connected to the SAT inputs in no particular order.
The 5 Lite range provides a nominal gain of 0dB(±2dB) for Satellite and
3dB(±2dB) Terrestrial Reception. To facilitate the reception of FM and DAB
radio at the outlets, the FM and DAB aerials must be combined with the
Terrestrial TV Aerial using a Triplexer. The combined signals are then connected
the TERR input of the Multiswitch.
A high rejection LTE filter is fitted to avoid interference from 4G LTE signals.
If required, a Terrestrial mast amplifier can be powered via the multiswitch by
setting the 12V switch to the “ON” position. If a mast amplifier is not being
used, this switch must be left in the “OFF” position.
The Power Supply Unit provided must be connected to the 18V DC Input. This
will power the Multiswitch as well as provide power to the Satellite LNB inputs.
A maximum of 500mA LNB power is available which enables the use of a line
powered launch amplifier if required.
If a local mains supply is not available such as in lofts and outdoor cabinets, the
Power Supply Unit may be conveniently fitted elsewhere whereby the 18V DC
F-Type lead can be extended using coaxial cable.
INSTALLATION INSTRUCTIONS
MOUNTING THE MULTISWITCH
Select a suitable location to install the Multiswitch. Do not install the
Multiswitch in damp, humid, hot or dusty areas. Using the screw slots on the