![background image](http://html.mh-extra.com/html/whyte/20c-s/20c-s_supplementary-service-manual_978495010.webp)
2010 Edition 1
Page 10
WHYTE Service Manual
Bolt-up Type: Fig.2
Tools Required:
5mm Allen Key
(Note, refer to the seat-pin manufacturers instructions in conjunction with these notes).
To adjust the seat height, using the 5mm Allen key, undo the M6 bolt (5) just enough to allow
the seat-pin to slide freely up and down. Set the height to the desired level, and re-tighten the
M6 bolt (5) with the 5mm Allen Key just enough so as to prevent the seat-pin from slipping down
and twisting.
To Adjust the seat height with the QR Lever assembly fitted, simply undo the QR Lever (3) from
the Closed position to the Open position. Next adjust the height of the Seat Pin to the desired
level, and close the QR lever (3) from the Open position to the Closed position. The QR closing
force can be adjusted by turning the QR Adjuster Bobbin (7) clockwise or anti-clockwise before
closing the QR Lever (3).
Item
Description
1
QR Lever Cam Grub Screw
2
QR Lever Cam
3
Whyte QR Lever
4
Plastic Shim
5
Whyte Main Frame
6
Whyte Seat Clamp Band
7
QR Adjuster Bobbin
8
QR Shaft
9
T-Pad
Fig.3: Getta-Grip Seat Clamp: QR Lever
Item:
Description
1
Whyte Seat Clamp Band
2
T-Pad
3
Whyte Main Frame
4
Barrel Nut
5
M6 x 30mm Fastener
6
M6 Washer
Fig.2: Getta-Grip Seat Clamp: Bolt-up
Содержание 20C S
Страница 2: ......
Страница 18: ...2010 Edition 1 Page 18 WHYTE Service Manual NOTES continued ...
Страница 19: ...2010 Edition 1 Page 19 WHYTE Service Manual NOTES continued ...
Страница 20: ......