background image

11 

Care and Maintenance 

CLEANING YOUR APPLIANCE  

 

Turn off the power, unplug the appliance, and remove all contents from the appliance and store them in a 
suitable place.  

 

Clean the inside, the door seal and the inside of the glass with a clean, damp cloth. 

 

Never use detergents or other substances that emit odors. 

 

Always keep the door closed when cleaning the outside of the appliance. Make sure no detergent odors pen-
etrate into the appliance. 

 

Clean the side panels and door surfaces with a clean and soft cloth. If necessary, use a moist cloth. Alterna-
tively, use a microfiber cloth. 

 

The humidity tray should be hand-washed with water and detergent. After cleaning, always make sure the 
tray is thoroughly rinsed with clean water before replacing. 

 
PREMISES POWER FAILURE

 

 

In the event of a power interruption, temperature settings automatically defaults to factory settings once 
power is restored. 

 

Factory default temperature setting is 15ºC. To set a different desired temperature, refer to the "SETTING 
THE TEMPERATURE" section.  

 

Most power failures are corrected within a few hours and should not affect the temperature of your appliance 
if you minimize the number of times the door is opened. If the power is going to be off for a longer period of 
time, you need to take the proper steps to protect your contents.  

 
VACATION TIME 

 

Short vacations: Leave the appliance operating during vacations of less than two days. 

 

Long vacations: If the appliance will not be used for an extended period, remove all items and turn off the 
appliance. Clean and dry the interior thoroughly. 

 

MOVING YOUR APPLIANCE 

 

Remove all items inside the appliance.  

 

Securely tape down (we recommend using painter’s tape) all loose items (shelves) inside your appliance.  

 

Turn the adjustable legs up to the base to avoid damage.  

 

Tape (we recommend using painter’s tape) the door shut.  

 

Be sure the appliance stays secure in the upright position during transportation and protect the exterior of 
appliance with a blanket, or similar item.  

 

PREPARING FOR STORAGE

 

If the wine cabinet refrigerator will not be used for a long time, or is to be moved to another place, it will be 
necessary to defrost the unit and dry the interior. 
1.  Disconnect the wine cabinet refrigerator from the power supply by removing the power plug from the wall 

socket. 

2.  Leave the door open to allow for air circulation and to prevent mold, mildew and unpleasant smells. 

CAUTION: Store the unit out of the reach of children. If you have children, you may want to take 
additional precautions such as removing the door to prevent a child from being trapped inside the 
wine cabinet refrigerator 

NOTE: 

 

If the wine cabinet refrigerator is unplugged, encounter power lost, or turned off; you must wait 3 to 5 minutes 
before restarting the wine cabinet refrigerator.  

 

When the wine cabinet refrigerator is used for the first time or restarted after having been shut off for a long 
time, there could be a few degrees variance between the temperature you select and the one indicated on the 
display. This is normal and it is due to the length of the inactivation time.

 

Содержание FWC-1201BA















Отзывы: