13
Storage
DOOR LOCK
The appliance is provided with a lock and key combination. The keys are located inside the plastic bag that holds
the User Manual. Insert the key into the lock and turn it counterclockwise to unlock the door. To lock the door do
the reverse operation making sure metal pin is engaged completely. Remove the key and place it in a secure
place.
STORAGE
Wine bottles may differ in size and dimensions so the actual number of bottles can be stored may vary. The
164
bottle capacit
y is
approximate maximum when storing traditional Bordeaux 750 ML bottles and includes bulk
storage.
You may load your wine bottles in single row or by stacking while taking note of the following: if you do not have
enough bottles to fill your wine refrigerator, it is better to distribute the load throughout the wine refrigerator so as
to avoid “all on top” or “all below” type loads.
You can remove or relocate adjustable shelves to accommodate larger type of bottles (see removing shelves)
Keep small gaps between the walls and the bottles to allow air circulation.
Do not over load your wine refrigerator
Avoid obstructing the internal fans (located inside on the back panel of the wine refrigerator).
Do not try to slide the shelves outwards beyond the fixed position to prevent the bottles from falling.
Do not pull out more than one loaded shelf at a time as this may cause the wine refrigerator to tilt forward if
not properly installed.
REMOVING SHELVES
To remove any of the shelves from the rail compartment, move the shelf to the position where the notch of
shelf is exactly under the plastic post and then lift it up and out.
In order to replace the shelf, repeat steps described above in reverse. And make sure to engage the shelves
with the small pegs of the extended rails when the model is equipped with roller system.
