background image

Safety 

Precautions

Page 

6

 

1.

Transport of equipment containing flammable refrigerants

.

See transport regulations

2.

Marking of equipment using signs

.

See local regulations

3.

Disposal of equipment using flammable refrigerants

.

See national regulations.

4.

Storage of equipment/appliances

.

The storage of 

the 

equipment should be in accordance with the manufacturer's instructions.

5.

Storage of packed (unsold) equipment

.

Storage package protection should be constructed such that mechanical damage to the equipment
inside the package will not cause a leak of the refrigerant charge. The maximum number of pieces of
equipment permitted to be stored together will be determined by local regulations.

6.

Information on servicing

.

1)

Checks to the area

Prior to beginning work on systems containing flammable refrigerants, safety checks are necessary
to

 

ensure that the risk of ignition is minimi

z

ed. For repair to the refrigerating system, the following

precautions shall be complied with prior to conducting work on the system.

2)

Work procedure

Work shall be undertaken under a controlled procedure so as to minimi

z

e the risk of a flammable

gas or

 

vapor being present while the work is being performed.

3)

General work area

All maintenance staff and others working in the local area shall be instructed on the nature of work
being carried out. Work in confined spaces shall be avoided. The area around the workspace shall be
sectioned off. Ensure that the conditions within the area have been made safe by control of
flammable

 

material.

4)

Checking for presence of refrigerant

Explanation of symbols displayed on the unit(For the unit adopts R32/R290 Refrigerant only):

WARNING

CAUTION

CAUTION

CAUTION

This symbol shows that this appliance used a flammable refrigerant. If the refrigerant

 

 

is leaked and exposed to an external ignition source, there is a risk of fire.

This symbol shows that the operation manual should be read carefully.

This symbol shows that a service personnel should be handling this equipment 

with reference to the installation manual.
This symbol shows that information is available such as the operating manual or 

installation manual.

Caution: Risk of fire/flammable materials

Содержание ARC-102CS

























Отзывы: