background image

17 |

P a g e

 

CARE AND MAINTENANCE

 

 

IMPORTANT

  Switch off the air conditioner and disconnect the plug from the power outlet 

  Drain water by removing the drain plug 

  Always transport the air conditioner in an upright position only 

 

CLEANING THE AIR FILTERS

 

  To ensure the air intake is filtered properly and 

to assure that your air conditioner runs 
efficiently, it is recommended to clean the air 
filters at least once every two weeks 

  This unit has two pre-filters; the upper and the 

lower filters 

  Switch off the air conditioner and pull out the 

upper and lower air filter from the unit by 
following the arrow directions shown. 

  Use a vacuum cleaner or tap lightly to remove 

loose dust and dirt from the filters. Then rinse 
them thoroughly under warm or cold running 
water (no hotter than 100F.) 

  Dry thoroughly before re-inserting the filters 

 

 

 

CLEANING THE AIR CONDITIONER

 

  Always switch off the air conditioner and disconnect the plug from the power supply outlet before 

cleaning the air conditioner 

  Use a soft damp cloth to wipe the body of the unit. 

  Never use harsh chemicals, oil-based products, detergents, chemically treated cloths or other 

cleaning solutions. These could possibly damage the body of the air conditioner 

 
 

END OF SEASON STORAGE

 

  Switch off the air conditioner and disconnect the power plug from the power supply outlet before 

cleaning the air conditioner 

  Clean the air filters 

  Drain the condensed water completely 

  On a warm day, turn on the Fan only mode for half a day so that the inside can dry out 

completely 

  Wrapped the power cord and bundle it with the tape  

  Remove the batteries from the remote controller 

  Disconnect the exhaust hose  

  It is recommended that the air conditioner be put back into its original carton for storage

Содержание ARC-08WB






















Отзывы: