7
Built-in Cabinet Instructions
This unit is designed for both built-in or free standing
installation. If you plan to use this unit in a built-in
application please follow the requirements shown to
the below.
Cabinet Opening Dimensions (min)
Width
15 cm
Depth
60 cm
Height
87 cm
Attention
Store wine in sealed bottles.
Do not overload the cabinet.
Do not open the door unless necessary.
Do not cover shelves with aluminum foil or any
other shelf material which may prevent air
circulation.
Should the wine cooler be left empty for long
periods it is suggested that the appliance is
unplugged, and after careful cleaning, leave the
door ajar to allow air to circulate inside the
cabinet in order to avoid possible condensation,
mold or odours forming.
Installing the Handle
1.
Remove the door gasket on the side you wish
to install the handle - you can see two
designated holes for handle installation.
2.
Install the handle tightly as shown above with
two screws, lock washers and flat washers
provided.
3.
Replace the door gasket.
Handle
Door Frame
Gasket
Screw
Lock Washer
Flat Washer
Содержание WC150
Страница 5: ...5 Features of Your Wine Cooler ...