Page 4 of 6
STEP 3.2: Tighten 'T' Runner at Footboard (F) to Drawer Slat (H) with CSK M4 x 16mm (1).
STEP 3.1: Insert Drawer (N) to Footboard (F) until completely closed.
STEP 3.3: If Drawer (N) does not close properly,adjust the adjuster at the bottom of Drawer Slat Support (I) up or down until the Drawer (N) closes tightly.
'T' Runner
STEP 3.2
H
1
STEP 3.1
N
G
N
F
I
Adjuster
G
ASSEMBLY INSTRUCTION
DESCRIPTION : QUEEN STORAGE HEADBOAD /
FOOTBOARD AND SIDERAIL
NOTE : MUST TIGHTEN SCREWS PERIODCALLY WITH USE SCREW WILL BECOME LOOSE.
CHECK TIGHTNESS OF ALL SCREW EVERY 6-8 WEEKS.
STEP 3.3
P
N
F
I
B