1123AUFb McKenzie Office Chest
Assembly Instructions
1123AUFb
— Page 6 — 07/13
4.
Tipping restraint:
Locate two studs in the wall behind the unit. Attach a Clip (T1) to one wall
stud with two #8 x 2" Black Screws (T3). See Figure 4a. Attach a second clip to the unit with two
#6 x 5/8" Philtruss Screws (T5). See Figure 4b. Connect the two clips with the Nylon Restraint
Strap (T2). Pull the Nylon Restraint Strap (T2) tight so there is no slack. See Figures 4c and 4d.
Repeat this procedure to attach the second tipping restraint. If you cannot locate two studs,
purchase the proper wall attachment hardware for your type of wall and secure the unit.
Fig. 4a
T1
T3
Pull tight
Fig. 4d
T1
T2
T5
Fig. 4c
Pull the Nylon Restraint
Strap (T2) tight
so there is no slack.
T3
T5
T1
Fig. 4b
