5202AFGMS Ambierle Coffee
Table
Assembly Instructions
5202AFGMS
— Page 3 — 03/14
Tools Required: Phillips Screwdriver, 9/16" or Adjustable Wrench
1.
Turn the unit upside down on a clean, protected surface. The Adjustable Glides with hex nuts
(E) are used as drawer stops, loosen the glides until you are able to remove the drawers (C)
from the unit and set them aside.
2.
Place two Legs (B) at the front corners of the Case Assembly (A) making sure the drilled
corners of the legs face toward the Corner Blocks. Insert two 3/8" x 2-1/2" Hex Bolts (R) with
two Flat Washers (Q) through the Corner Blocks and into the leg and fasten securely. See
Figures 2 and 2a. Repeat for the other two legs.
Fig. 1
Fig. 1a
A
E
Fig. 2
Fig. 2a
R
B
B
A
Q
R
x 8
x 8
Q
