Whittier Wood 4663AFDH Скачать руководство пользователя страница 1

Страница: 1 / 24

P.O. Box 2827

Eugene, OR 97402 USA

Outside U.S. or Canada: 541- 687- 0213

800-653-3336

Fax: 541-687-2060 •

Fax: 541-687-2060 • www

www.whittie

.whittierrwood.com

wood.com

Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A

For normal household use only.

recommended for commercial use.

Congratulations!

Production Code:

02/09

Service Policy:

We will replace parts

which are defective, missing or damaged.

Please contact Whittier Wood Products

customer service department directly (by

phone, fax, mail or E-mail) for replacement

parts.

Hours:

Our friendly customer service staff

can be reached Monday-Friday 7:00 a.m. to

5:00 p.m. (Pacific Time). A message can be

left 24 hours a day, 7 days a week.

To Order:

Provide the complete furniture

model number, part letter, production code,

quantity needed, reason for replacement

and your full name and address along with

a telephone number in case we need to

contact you.

Parts ship from our Eugene, Oregon factory

within 1 or 2 business days from the time

we receive the request. Please allow 5-10

business days for delivery.

This fine piece of furniture will make a handsome

addition to your home. For the best results, start

by reading the Assembly Instructions

AND

Warning

Label before you begin your project.

Unload items from this unit prior to moving.

Before loading or moving this unit, check all screws

and supports for tightness.
Read and follow the Warning Label instructions.

Store the item: 1) in the box; 2) in a dry place; 3) in

temperatures ranging from 40° to 90°. (Not on a cold,

possibly damp, cement floor.)

Inspect your furniture periodically for any loose

glue joints, screws or any other problem that might

affect the stability of your furniture. Tighten or repair

as needed.
This Assembly requires two people.

DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.

Eastport

Bunk Bed

4663AFDH

Assembly Instructions

Model #

Completely read the Assembly Instructions and

Warning Label before beginning your project.

Содержание 4663AFDH

























Результаты поиска

Содержание 4663AFDH

Отзывы:

Бренды по названию

Популярные бренды

Whittier Wood 4663AFDH, Руководство по сборке

Результаты поиска

Содержание 4663AFDH

Отзывы:

Бренды по названию

Популярные бренды