3505GACb 3505CAFb McKenzie Lift Top Coffee Table
Assembly Instructions
3505GACb_3505CAFb
— Page 3 — 06/18
Tools Required: 9/16" or Adjustable Wrench
1.
Remove the Drawers (E) from the Case (A). To remove the drawers, pull up on the left side of
the Drawer Release Lever while pushing down on the right Drawer Release Lever. See Figure
1a. Note where each drawer came from to ensure correct installation.
2.
Turn the unit upside down on a clean, protected surface. Place the Left Front/Right Back Leg
(Ca) and the Right Front/Left Back Leg (Da) at one end of the Case, making sure the drilled
corners of the legs face toward the Corner Blocks. It is important the side of the leg exposing the
wheel face each other. Insert two 3/8" x 2-1/2" Hex Bolts (R) with two Flat Washers (Q) through
the Corner Blocks and into the leg and fasten securely. See Figures 2 and 2a. Repeat for the
other three legs.
Fig. 2
Fig. 2a
Q
R
Da
Da
Ca
Ca
Q
R
x 8
x 8
Fig. 1
Drawer Release Lever
Fig. 1a
