Whittier Wood 2906AFGAC Скачать руководство пользователя страница 3

Страница: 3 / 5

ASSEMBLY INSTRUCTIONS

TOOLS REQUIRED:

Phillips Screwdriver, Mallet or Padded Hammer, 9/16" Wrench and 7/16" Wrench, Wood Glue

Page 3 — 2906AFGAC — 05/09

2906AFGAC 48" Pedestal Extension Table

DOWEL HOLE

Fig. 2

Fig. 2a

Fig. 1a

F E

Turn the Pedestal (B) upside-down so the top end of the pedestal is on the floor. Apply a light film

of glue into each of the four dowel holes in the Pedestal. See Figure 2a. Insert the Foot (C)

into the holes on the Pedestal (B). With a damp rag, quickly wipe off any excess glue. The Hanger

Bolts (Q) should go all the way through the base. Gently tap feet into place with padded hammer.

Fasten in place with 5/16" Washer (E) and 3/8" Hex Nut (F). See Figure 2.

Place the Top Assembly (A) upside down on a clean, protected surface and remove the Feet (C)

as seen in Figure 1 and place them off to the side. Unlatch the locks. Turn the top assembly

right-side up and pull open the table ends to expose the Leaf Assembly (G). Remove the Leaf

Assembly (G) and set it off to the side. See Figure 1a. Remove the foam now, but when you store

the leaf, place foam in between the folded leaves. This will help protect its surface.

Fig. 1

Shipping Straps

Leaf Hinge and Lever Lock

Leaf Hinge

and Lever

Lock

Содержание 2906AFGAC





