2403AUFg McKenzie Lateral File Cabinet
Assembly Instructions
2403AUFg — Page 4 — 10/17
Tools Required: Phillips Screwdriver, Pencil.
1.
This piece of furniture includes a drawer interlock system allowing only one drawer to be open at
a time. This is a safety feature to reduce the risk of tip over. Do not defeat or remove the drawer
interlock system. Drawers need to be removed to reconfigure the file drawers and anchor the file
cabinet to reduce the risk of tip over.
2.
When removing drawers from furniture featuring the Anti-Tip Drawer Interlock System it is
important that the drawer be installed back in its original location. Numbers and letters are
stamped on the back of the drawers. Stamping sequence starts at the bottom, moves to the top.
Drawer back stamping example:
3.
To remove a drawer from the Case (Ag), pull up on the left Drawer Release Lever while pushing
down on the right Drawer Release Lever and pull out the drawer. See Figures 3 and 3a. Note
where each drawer came from to make sure you place them back into their correct positions.
Fig. 3
Drawer Release Lever
Fig. 3a
1
Fig. 2
2
