2403AFGACb; 2403AFCAFb McKenzie Lateral File Cabinet
Assembly Instructions
2403AFGACb_2403AFCAFb — Page 4 — 04/12
Tool Required: Phillips Screwdriver
1.
Remove the upper drawer from the Case (Ab). To do that, pull up on the left Drawer Release
Lever while pushing down on the right Drawer Release Lever and pull out the drawer. See
Figure 1a. Note where each drawer came from to make sure you place them back into their
correct positions.
2.
To remove the lower drawer, rotate the upper toggles near the top of the Left and Right Anti-Tip
Bars (ZA and ZB) to the locked position. See Figures 2 and 2a and 2b. (When the toggles are in
their unlocked positions, you cannot open the lower drawer.) Pull the drawer out as far as you
can and when you can access them, pull up on the left Drawer Release Lever while pushing
down on the right Drawer Release Lever and pull out the drawer. See Figures 2c and 2d.
Fig. 2
Fig. 2a
Unlocked position
Locked position
Fig. 2b
Fig. 2c
Drawer Release Lever
Fig. 2d
Fig. 1
Drawer Release Lever
Fig. 1a
