
2403AFGAC_2403AFCAF — Page 3 — 01/11
Tool Required:
Phillips Screwdriver
Assembly Instructions
2403AFGAC; 2403AFCAF McKenzie Lateral File Cabinet
1.
Remove the drawers from the Case (A). To do that, pull up on the left Drawer Release Lever
while pushing down on the right Drawer Release Lever and pull out the drawer. See Figure 1a.
Note where each drawer came from to make sure you place them back into their correct positions.
Fig. 1
Fig. 1a
Drawer Release Lever
Fig. 3
Place the cabinet against the wall. Using three #8 x 2-3/4" Black Screws (U), secure the unit to
the wall. See Figure 3.
3.
There are three ways to help stabilize your file cabinet and reduce the risk of tip-over.
2.
Position the unit at the desired location. To level the unit, twist the Adjustable Glides
(W) on the bottom two front corners. See Figure 3.
Wall
Choice #1
U
U
x 3
U
W