2346GACd 2346CAFd McKenzie Queen Mantel Bed
2349GACd 2349CAFd McKenzie King Mantel Bed
Assembly Instructions
This assembly requires two people.
2346GACd_2346CAFd_2349GACd_2349CAFd_Page 5 — 04/18
Tools Required
:
Phillips screwdriver
1.
Remove the Slats (D) from the back of the Headboard (Ac) and place them off to the side. See
Figures 1 and 1a.
Notes:
Step 2 & 3 are for the McKenzie King Mantel Bed (#2349) only
.
2.
NOTE: READ CAM INSTRUCTIONS NOW BEFORE YOU BEGIN THE FOLLOWING STEP.
Insert Cam Housings (YK) into the two pre-drilled holes on the Headboard Assembly (Ac) as
shown in Figure 2. Lower Top Assembly (YH) so that the Cam Connectors (YJ) fit into the
housings (YK) tighten the cam housings as indicated in the Cam-lock System instructions.
See Figures 2 and 2a.
Fig. 2
Ac
YH
YK
x 2
YK
Fig. 2a
YK
YJ
YK
Fig. 1
Shipping Straps
D
Ac
Fig. 1a
Ac
D
Shipping Straps
(For 2346)
(For 2349)
