Whittier Wood 2074AUF Скачать руководство пользователя страница 4

Страница: 4 / 7

2074AUF 73"W McKenzie Center Channel Console

Assembly Instructions

Tool Required:

Phillips Screwdriver

2074AUF — Page 4 — 07/10

Fig. 3

To finish the Glass Door Frame (F), you must first remove the glass. Remove the door from its

hinges and lay it face-down on a clean, protected surface. Remove the #6 x 3/4" Brass Flat Head

Screws (ZM), the Door Glass Support Stiles (M), Door Glass Support Rails (L) and set aside. Carefully

lift the Door Glass (I) and put it safely away. Finish the door frame, stiles and rails and, after

the finish dries, replace the glass and attach the Door Glass Support Rails (L) and Door Glass Support

Stiles (M) with #6 x 3/4" Brass Flat Head Screws (ZM). Repeat the step for the other door. Attach the

doors to the base unit. See Figures 1, 1a and 1b.

Fig. 1

x 24

Fig. 1a

Fig. 1b

DO NOT LEAN ON THE GLASS AT ANY TIME.

Place the console at its final destination. Rotate the Small Adjustable Glides (ZG) found at the

bottoms of the legs and the Adjustable Glides (ZF) in the bottoms of the two Assembled Feet

(ZD) until the unit is level. See Figure 3.

To open the Speaker Door (H), press the upper left corner until the magnet releases. Gently grasp

the middle of the door and pull open. To shut the door, gently but firmly push on the Speaker Door

until the Magnetic Plate (T) makes secure contact with the Magnetic Push Lock (R). See Figure 3.

If you need to install your speaker from the back, remove the 18 #6 x 5/8" Philtruss Screws (W) and

pull away the Fitted Back (ZT). After installing the component, replace the Fitted Back and attach

with the 18 #6 x 5/8" Philtruss Screws (W).

T ZT

Содержание 2074AUF







