1716RGBb Stonewood Queen Storage Bed
1726RGBb Stonewood King Storage Bed
1746RGBb Stonewood Queen Bed
1749RGBb Stonewood King Bed
Assembly Instructions
This assembly requires two people.
1716RGBb_1726RGBb_1746RGBb_1749RGBb
Page 11 — 03/17
8.
Place your bed in its final position. Using a 1/2" wrench or Slotted screwdriver adjust the
Adjustable Glides (ZG) on the bottoms of the Assembled Feet (M) so that the top edge of the
trestles are 17" from the floor.
IMPORTANT: Make sure the Glides touch the floor and carry weight.
To make sure the bed is square, measure the distance between opposing corners. If one of the
measurements is larger, tap on a footboard leg until the measurement is equal. See Figure 8.
9.
Place the Left/Right Center Deckboards (K) as shown in Figure 9 and secure with
sixteen #8x1-1/4" Black Screws (R). There should be a small gap between each deckboard.
Fig. 9
R
R
x 16
K
Fig. 8
