1610AFGAC; 1610AFCAF Center Wall Unit without doors &
1611AFGACa; 1611AFCAFa Center Wall Unit with doors
Assembly Instructions
1610AFGAC_1610AFCAF_1611AFGACa_1611AFCAFa
— Page 3 — 06/14
Tool Required: Phillips Screwdriver, Pencil, Rubber Mallet or Padded Hammer
1.
To move the adjustable shelves:
Determine where you want to place the Adjustable Shelves (A). Remove the #6 x 1/2" Undercut
Screws (E) from the underside of the shelf and take out the Shelf and Shelf Brackets (D). Insert
the Shelf Brackets (flat side down) into the four different holes and insert the shelf. You may
secure them by inserting #6 x 1/2" Undercut Screws (E). See Figures 1 and 1a.
2.
Level the unit using the Adjustable Glides (J) located on the bottom of the unit. See Figure 1.
3.
To adjust the doors, follow the instructions below.
Fig. 3
1
Side adjustment 4mm (5/32")
To move the door towards the side
panel, loosen screw
‘1’
and tighten
screw
‘2’
. To move the door away
from the side panel, loosen screw
‘2’
and tighten screw
‘1’
.
Depth Adjustment 4mm (5/32")
Loosen screw
‘2’
(just one turn),
adjust the door to the desired position
and tighten the screw.
Height Adjustment 4mm (5/32")
Loosen screw
‘3’
, adjust the door to
the desired position and tighten
the screw.
3
3
2
Fig. 1
E
D
Fig. 1a
B
B
B
J
