3
2
3
1
Side adjustment 4mm (5/32")
To move the door towards the side panel, loosen
screw
"1"
and tighten screw
"2"
. To move the door away
from the side panel, loosen screw
"2"
and tighten screw
"1".
Depth Adjustment 4mm (5/32")
Loosen screw
"2"
(just one turn). Adjust the door to the
desired position and retighten the screw.
Height Adjustment 4mm (5/32")
Loosen screw
"3"
, adjust the door to the desired position
and retighten the screw.
Tools required: Phillips screwdriver
Page 3 — M_24-36w_72-84h_1525-1547AEGAC_AEGSP_AECAF — 02/010
2
1.
To move the adjustable shelves:
To adjust the doors:
Determine where you want to place the Adjustable Shelves (A). Remove the #6 x 1/2" Undercut
Screws (C) from the underside of the shelf and take out the Shelf and Shelf Brackets (B). Insert the
Shelf Brackets (flat side down) into the four different holes and insert the shelf. You may secure
them by inserting #6 x 1/2" Undercut Screws (C).
3.
Place the bookcase at your desired location. Level the unit using the Adjustable Glides (I) located on
the bottom of the unit.
4.
Install the Tipping Restraint (TR). Carefully follow the instructions inside the package. If you cannot
locate a stud, purchase the proper tipping restraint for your type of wall and install.
5.
If there is a problem with a Hinge (K), do not attempt to remove it. Contact Whittier
Customer Service first.
Glazed Antique Cherry finish (AEGAC) &
Glazed Spice finish (AEGSP) & Caffè finish (AECAF)
McKenzie Alder Bookcase — Assembly Instructions
