1302GAC 1302CAF McKenzie Twin SL Headboard
Parts List
1302GAC_1302CAF — Page 2 — 08/17
Please identify the parts and check that quantities received match those on this list.
If you need to replace a part, refer to the following letter and part name.
Part
Description
Quantity
A
Headboard Assembly
1
B
Left Bracket (attached)
2
C
Right Bracket (attached)
2
D
#8 x 1" Black Screw (inserted)
16
X
#8 x 1-1/4" Pan Head Screw (inserted)
4
ZD
#12 x 2-1/2" Pan Head Screw (inserted)
6
ZE
#14 x 1-1/4" Pan Head Screw
6
ZF
Washer
6
Assembly Instructions
Tools Required: Drill, 1/8" bit, Phillips screwdriver.
IF YOU ARE USING A HOLLYWOOD BED FRAME:
1.
Adjust the Hollywood frame to fit your mattress and box spring.
2.
Place the Headboard (A) against the end brackets of the frame and mark the locations for the
screws. Drill pilot holes approximately 1-1/4" deep. (To make sure you don’t drill deeper,
measure 1-1/4" up from the end of the drill bit and wrap a piece of tape around the bit. Stop
drilling when the edge of the tape meets the wood.)
3.
Position the Headboard (A) against the frame and attach using six #14 x 1-1/4" Pan Head
Screws (ZE) and Washers (ZF).
