
1150GBCH Cascade 6-Drawer Lingerie Chest
Assembly Instructions
1150GBCH — Page 3 — 03/12
Tool Required: Phillips Screwdriver
1.
Place the chest at its final destination. Rotate the Adjustable Glides (U) on the bottoms of the
legs until the unit is level. See Figure 1.
2.
Tipping restraint:
Locate a stud in the wall behind the unit. Attach a Clip (T1) to the wall stud
with two #8 x 2" Black Screws (T3). See Figure 2a. Attach the second clip to the unit with
two #8 x 1" Pan Head Screws (T4). See Figure 2b. Connect the two clips with the Nylon
Restraint Strap (T2). Pull the Nylon Restraint Strap (T2) tight so there is no slack. See Figures
2c and 2d. If you cannot locate a stud, purchase the proper wall attachment hardware for your
type of wall and secure the unit.
U
U
Fig. 1
Fig. 2a
T1
T3
T4
T1
Fig. 2b
Pull tight
Fig. 2d
T1
T2
T3T4
Fig. 2c
Pull the Nylon Restraint
Strap (T2) tight
so there is no slack.