1127GACg; 1127CAFg; 1128GACg; 1128CAFg; 1181GACg; 1181CAFg
& 1182GACg; 1182CAFg McKenzie Chest & Dressers
Assembly Instructions
1127GACg_1127CAFg_1128GACg_1128CAFg_1181GACg_1181CAFg_1182GACg_1182CAFg — Page 4 — 10/16
Tool Required: Phillips Screwdriver, Pencil.
1.
This piece of furniture includes two drawer interlock systems, one controlling each vertical bank
of drawers; this allows only one lower drawer in each bank to be open at a time. This safety
feature reduces the risk of tip over. Do not defeat or remove the drawer interlock systems.
2.
Place the unit at its final destination. Rotate the Small Adjustable Glides (Y) found at the corners
of the unit and the Adjustable Glide with Hex Nut (YA) at the bottom of the Assembled Foot (YB)
until the unit is level. See Figure 2.
3.
If you need to remove your drawers, pull up on the left Drawer Release Lever while pushing
down on the right Drawer Release Lever and pull out the drawer. See Figures 3 and 3a. Note
where each drawer came from to make sure you place them back into their correct positions.
Fig. 3
Drawer Release Lever
Fig. 3a
Fig. 2
Y
YA
YB
Y
