1122GACb 1122CAFb McKenzie 2-Drawer Bench
Assembly Instructions
1122GACb_1122CAFb
— Page 3 — 05/18
Tool Required: Phillips Screwdriver
1.
Place the bench at its final destination. Rotate the Adjustable Glides (K) on the bottoms of the
legs until the unit is level. See Figure 1.
Please note: Our upholstered seat is covered in Bonded Leather. To clean it, simply use a soft cloth,
mild soap and water. DO NOT use alcohol based cleaning agents.
2.
If you wish to reupholster the seat of your bench, begin by removing the drawers. To remove the
drawers, push up on the left Drawer Release Lever while pushing down on the right Drawer
Release Lever (see Figures 2a and 2b). Place the unit upside down and remove the six screws
holding the Seat in place (see Figures 2 and 2c). After the seat has been reupholstered reverse
this process to reattach it.
M
x 6
Fig. 2
M
M
M
B
Drawer Release Lever
Fig. 2a
Fig. 2b
Fig. 2c
K
Fig. 1
K
