1733RGBa Stonewood Cal-King Storage Bed
1752RGBa Stonewood Cal-King Bed
Assembly Instructions
This assembly requires two people.
1733RGBa_1752RGBa — Page 9 — 05/17
7.
Place your bed in its final position. Using a 1/2" wrench or Slotted screwdriver adjust the
Adjustable Glides (ZE) on the bottoms of the Assembled Feet (J) so that the top edge of the
trestles are 17" from the floor.
IMPORTANT: Make sure the Glides touch the floor and carry weight.
To make sure the bed is square, measure the distance between opposing corners. If one of the
measurements is larger, tap on a footboard leg until the measurement is equal. See Figure 7.
8.
Place the Center Deckboards (H) as shown in Figure 8 and secure with
sixteen #8x1-1/4" Black Screws (O). There should be a small gap between each deckboard.
This concludes the assembly process for Stonewood Cal-King Storage
Bed, if you have purchased a Stonewood Cal- King Rail Bed please
refer to the instructions beginning on page 10.
Fig. 8
O
O
x 16
H
Fig. 7
