3456AFCAFa Stayton Cocktail Table
Assembly Instructions
3456AFCAFa
— Page 3 — 04/14
Tools Required: Phillips Screwdriver, 9/16" or Adjustable Wrench, Rubber Mallet or Padded
Hammer
1.
Remove the Drawer (E) from the Top Assembly (A). To remove the drawer, pull up on the left
side of the Drawer Release Lever while pushing down on the right Drawer Release Lever. See
Figure 1a.
2.
Turn the Top Assembly (A) upside-down on a clean, protected surface. Place a Left Front/Right
Back Leg (B) and a Right Front/Left Back Leg (C) at the back of the Top Assembly (A), making
sure the drilled corners of the legs face toward the Corner Blocks. It is important the sides of the
legs exposing the wheel face the drawer opening of the unit. Attach with 5/16" Flat Washers (P)
and 3/8" x 2-1/2" Hex Bolts (R). See Figures 2 and 2a.
Fig. 1
Drawer Release Lever
Fig. 1a
Fig. 2
C
B
Fig. 2a
A
P
R
x 2
x 2
R
P
