Page 2 — M_24-36w_72-84h_1525-1547AUF — Rev. 02/09
McKenzie 1525-1547AUF Alder Bookcase
with Doors — Parts List
1525AUF
(Shown)
A
D
A
A
J
D — Top Assembly —
Qty. 1 (installed)
E — Furniture Tipping
Restraint — Qty. 1
F — Tack Glide
— Qty. 2 (inserted)
G — #8x1" Pan Head Screw — Qty. 8 (inserted)
I — Small Adjustable Glide (installed) — Qty. 2
J — Door — Qty. 2 (installed)
K — Hinge — Qty. 4 (installed)
L — Base Plate — Qty. 4 (installed)
H — Nylon Insert — Qty. 2 (inserted)
M — Knob — Qty. 2 (installed)
N — #8 x 1½" Machine Screw — Qty. 2 (installed)
Tools Required: Phillips Screwdriver, Rubber Mallet or Padded Hammer
1.
TO MOVE THE ADJUSTABLE SHELVES
:
Determine where you want to place the Adjustable Shelves (A). Remove the #6x½" Undercut Screws (C) from the
underside of the shelf and take out the Shelf and Shelf Brackets (B). Tap the Shelf Brackets (flat side down) into the four
different holes and reinsert the shelf. You may refasten them by inserting #6x½" Undercut Screws (C).
2.
Level the unit using the Adjustable Glides (I) located on the bottom of the unit.
3.
When you have determined the location for your unit, install the Furniture Tipping Restraint (E). Carefully follow the
instructions on the package. If you cannot locate a stud, purchase the proper tipping restraint for your type of wall
and install.
4.
If there is a problem with a Hinge (K), do not attempt to remove it. Contact Customer Service first.
A —
Adjustable Shelf (installed)
1525AUF
1535AUF
1545AUF
1537AUF
1547AUF
Model #
1527AUF
Qty. 4
}
Qty. 5
}
B —
Shelf Bracket (inserted)
1525AUF
1535AUF
1545AUF
1537AUF
1547AUF
Model #
1527AUF
Qty. 16
}
Qty. 20
}
C —
#6x½" Undercut Screw (inserted)
1525AUF
1535AUF
1545AUF
1537AUF
1547AUF
Model #
1527AUF
Qty. 16
}
Qty. 20
}
Identify parts listed below and check that the quantities match what you’ve received.
If you need to replace a part, please refer to its name and letter.
3
2
3
1
Side adjustment 4mm (5/32")
TO ADJUST THE DOORS:
To move the door towards the side
panel, loosen screw
"1"
and tighten
screw
"2".
To move the door away
from the side panel, loosen screw
"2"
and tighten screw
"1".
Depth Adjustment 4mm (5/32")
Loosen screw
"2"
(just one turn).
Adjust door to desired position and
retighten screw.
Height Adjustment 4mm (5/32")
Loosen screw
"3"
, adjust door to
desired position and retighten screw.
