3502GACc 3502CAFc McKenzie Entry Table
3503GACc 3503CAFc McKenzie Sofa Table
Assembly Instructions
3502GACc_3502CAFc_3503GACc_3503CAFc — Page 3 — 08/20
Tools Required: Phillips Screwdriver, 9/16" or Adjustable Wrench
Tool Provided: Leveler Adjustment Key in the Zip bag taped to the Owner’s Manual and Safety
Guide.
1. Remove the Drawers (F) from the Case (Aa). To remove the drawers, pull up on the left side of
the Drawer Release Lever while pushing down on the right Drawer Release Lever. See Figure
1a. Note where each drawer came from to ensure correct installation.
2. Turn the unit upside down on a clean, protected surface. Place two Legs (D) at the front corners
of the Case (Aa) as shown in Figure 2. Face the drilled corners of the legs toward the Corner
Blocks. Insert two 3/8" x 2-1/2" Hex Bolts (Y) with two Flat Washers (X) through the Corner
Blocks and into the leg and securely fasten. See Figures 2 and 2a. Repeat for the other front
leg.
Fig. 2
D
X
Y
x 4
x 4
D
X
Y
X
Y
Fig. 2a
Fig. 1
Drawer Release Lever
Fig. 1a
