2407GACa 2407CAFa McKenzie Writing Desk
Assembly Instructions
2407GACa_2407CAFa — Page 3 — 06/20
Tools Required: Phillips Screwdriver, 9/16" or Adjustable Wrench, Mallet or Padded Hammer.
Tool Provided: Leveler Adjustment Key in the Zip bag taped to the Owner’s Manual and Safety
Guide.
1. Position the Legs (B, C, D and E) and Side Stretchers (G) as shown in Figure 1.
NOTE: Be
sure the insert holes on the top corners of the legs face inward and the pocket drilled
holes of the Side Stretchers face the bottom of the legs.
Using the dowel holes as guides,
insert the dowels of the Side Stretchers (G) into the holes in the Legs.
2. Insert the Back Stretcher (F) into the Back Legs (D & E) as shown in Figure 2. Place the Top
Assembly (A) upside-down on a clean, protected surface. Position the leg/stretcher assembly at
the corners of the Top Assembly (A). Insert the 3/8" x 2-1/2" Hex Bolts (V) with the Washers (S)
through the corner brace into the Legs and securely fasten. See Figure 2a.
Fig. 2a
S
V
x 4
x 4
F
A
Fig. 2
S
V
Fig. 1
G
G
C
B
E
D