background image

 

P.O. Box 2827 
Eugene, OR 97402 USA

 

Production Code: 
 
 
 
 
 

VN 

09/17 

 

Model # 

1380GACg 
1380CAFg

 

McKenzie Cal-King 
Bookcase Storage 
Bed

 

GAC = Glazed Antique Cherry finish 
CAF = Caffè finish
 
Assembly Instructions 

 

IMPORTANT NOTES: 

  For normal household use only. 

Not

 recommended for commercial use. 

  Unload items before you move this unit. 

  Do not overload the concealed storage areas. 

  Do not overload the drawers. 

  This assembly requires two people.

 

 

 

WARNING

 

Drilling, sawing, sanding or machining wood products can expose you to 
wood dust, a substance known to the state of California to cause cancer. 
Avoid inhaling wood dust or use a dust mask or other safeguards for 
personal protection.

 

For more information go to: www.p65warnings.ca.gov/wood

 

This product can expose you to chemicals, including formaldehyde, 
which are known to the State of California to cause cancer.

 

For more information go to: www.p65warnings.ca.gov/furniture 
 

 

DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.

 

 CUSTOMER SERVICE

 

If you ever have questions about your furniture, please do not hesitate to contact us. In the unlikely event you need a 
replacement part; we can make those parts available through an authorized Whittier Wood Furniture dealer. If you 
cannot order replacement parts through your dealer, please contact our customer service department. 

Hours:

 Our friendly customer service staff can be reached: 

Monday-Friday 8:00 a.m. to 5:00 p.m. (Pacific Time)

You may leave a message 24 hours a day, seven days a week. 

Customer Service: 

800-653-3336 • 

Outside the U.S.: 

541-687-0213 

 

Fax:

 541-687-2060• 

Email:

 [email protected]

 

 

Thank you for allowing us to help you furnish your 
home. We are certain you will be delighted with 
your new furniture for many years to come.  

 

Содержание McKenzie 1380CAFg




















Отзывы: