1377GACi 1377CAFi 1377FSTi McKenzie King Bookcase Headboard
Assembly Instructions
1377GACi_1377CAFi_1377FSTi — Page 4 — 03/20
Tools Required: Drill, 1/8" bit, Phillips Screwdriver, Slotted Screwdriver.
Optional: 7/16" open end or box end wrench.
NOTE: Use this instruction and hardware kit included with this 1377 McKenzie King Bookcase
Headboard ONLY if you are using a Hollywood frame.
IF you are using this product with Whittier Wood Furniture Footboard and Pedestal kits,
disregard this instruction and hardware and use what is included with your Footboard kit.
Note: Assembly can be separated into three pieces for ease of maneuvering through narrow
halls and stairways; if you need to perform this process see steps 7 through 11.
1. Remove the metal brackets attached to the Headboard (Ai).
2. Place the Headboard (Ai) against the end brackets of the frame and mark the locations for the
screws. Drill pilot holes approximately 1-1/4" deep. To make sure you don’t drill deeper,
measure 1-1/4" up from the end of the drill bit and wrap a piece of tape around the bit. Stop
drilling when the edge of the tape meets the wood.
3. Position the Headboard (Ai) against the frame and attach using six #14 x 1-1/4" Pan Head
Screws (YH) and six Washers (ZK).
4. Place your bed in its final position. To level the headboard, reach behind the bookcase front legs
and, using a slotted screwdriver, find the Large Adjustable Glide (YA). Using a slotted screw
driver, rotate the Large Adjustable Glides (YA) clockwise until they bear weight.
See Figures 4, 4a and 4b.
This is important if the bookcase headboard sits upon a carpet tack strip.
Fig. 4
Fig. 4a
Fig. 4b
The top of the Large
Adjustable Glide (YA)
is slotted.
YA
ZZ
Hollywood bed frame
removed for illustration
purposes.
