1372GACl 1372CAFl 1372FSTl McKenzie Queen Bookcase Headboard
Assembly Instructions
1372GACl_1372CAFl_1372FSTl — Page 4 — 12/19
Tools Required: Drill, 1/8" bit, Phillips screwdriver, Slotted screwdriver
NOTE: Use this instruction and hardware kit included with this 1372 McKenzie Queen
Bookcase Headboard ONLY if you are using a Hollywood frame.
IF you are using this product with Whittier Wood Furniture Footboard and Pedestal kits,
disregard this instruction and hardware and use what is included with your Footboard kit.
1. Remove the metal brackets attached to the Headboard (Aj).
2. Adjust the Hollywood frame to fit your mattress and box spring.
3. Place the Headboard (Aj) against the end brackets of the frame and mark the locations for the
screws. Drill pilot holes approximately 1-1/4" deep. To make sure you don’t drill deeper,
measure 1-1/4" up from the end of the drill bit and wrap a piece of tape around the bit. Stop
drilling when the edge of the tape meets the wood.
4. Position the Headboard (Aj) against the frame and attach using six #14 x 1-1/4" Pan Head
Screws (YG) and six Washers (ZK).
5. Place your bed in its final position. To level the headboard, reach behind the bookcase front legs
and, using a slotted screwdriver, find the Large Adjustable Glide (YA). Using a slotted screw
driver, rotate the Large Adjustable Glides (YA) clockwise until they bear weight.
See Figures 5, 5a and 5b.
This is important if the bookcase headboard sits upon a carpet tack strip.
Fig. 5
Fig. 5a
Fig. 5b
The top of the Large
Adjustable Glide (YA)
is slotted.
YA
ZZ
Hollywood bed frame
removed for illustration
purposes.
