2582RLN Bryce Queen Panel Storage Bed
2588RLN Bryce King Panel Storage Bed
2593RLN Bryce Cal-King Panel Storage Bed
Assembly Instructions
This assembly requires two people.
2582RLN_2588RLN_2593RLN — Page 5 — 11/19
Tools Required
: Phillips screwdriver, 1/2" open end or box end wrench.
1. Lay out and identify the parts from the Queen (#2587) or King (#2592) or Cal-King (#2598) Base
Kit. Set aside part Trestle Rail (V) (Queen) or Trestle Rail (W) (King) or Trestle Rail (X)
(Cal-King) for use later in the assembly process. Use the notch and dowels on Square End
Support (S) and Mitered End Support (R) as a guide attach to the Right Support (U) using the
Hex Bolts (ZG) and Washers (ZF) from the Headboard/Footboard Kit. See Figures 1 and 1a.
2. Attach the assembly to the Left Support (T) Using Hex Bolts (ZG) and Washers (ZF). See
Figures 2 and 2a. Identify the Headboard end of the assembly and place near the final bed
location. See drawing below.
Fig. 2
T
S
S
ZF
ZG
x 3
x 3
R
Footboard
Headboard
Fig. 2a
ZF
ZG
Fig. 1
S
S
U
ZF
ZG
x 3
x 3
Fig. 1a
ZF
ZG
R
