Whittier Wood Furniture Bryce 1244RLNa Скачать руководство пользователя страница 4

Страница: 4 / 8

1244RLNa Bryce 60"W Dresser

Assembly Instructions

1244RLNa — Page 4 — 07/21

Tools Required: Phillips Screwdriver, Pencil.

Tool Provided: Leveler Adjustment Key in the Zip bag taped to the Owner’s Manual and Safety

Guide.

1. This piece of furniture includes two drawer interlock systems, one controlling each vertical bank

of drawers; this allows only one lower drawer in each bank to be open at a time. This safety

feature reduces the risk of tip over. Do not defeat or remove the drawer interlock systems.

2. Place the unit at its final destination. Use the Leveler Adjustment Key (ZJ), found in the Zip bag

taped to the Owner’s Manual and Safety Guide to rotate the Slotted Levelers (ZI) on the bottoms

of the legs until the unit is level. See Figures 2 and 2a.

3. If you need to remove your drawers, pull up on the left Drawer Release Lever while pushing

down on the right Drawer Release Lever and pull out the drawer. See Figures 3 and 3a. Note

where each drawer came from to make sure you place them back into their correct positions.

Fig. 3

Drawer Release Lever

Fig. 3a

Fig. 2

Loose

Tight

Fig. 2a

Содержание Bryce 1244RLNa








