3816DUETa Addison Queen Platform Bed
3818DUETa Addison King Platform Bed
3820DUETa Addison Cal-King Platform Bed
Assembly Instructions
This assembly requires two people.
3816DUETa_3818DUETa_3820DUETa
— Page 4 — 04/19
Tools Required:
Phillips screwdriver, 7/16" open end or box end wrench and rubber mallet.
NOTE:
Remove this instruction from the Filler Strip Kit carton. Place Filler Strip and hardware kits to
the side to allow space for assembling the platform portion of the bed. Open the #3803 Platform
Connector Kit, which attaches the two Platforms together.
1.
Open and unfold the Platform Kit carton in the approximate location where the bed will be
placed. This will help protect the flooring and the faces of the platform components. Place the
Headboard Platform Assembly (Ka) face down in the approximate location where the headboard
will be located with the inside edge facing the End Platform Assembly (Ja). Align the Dowels (P)
in the edge of the Headboard Platform Assembly (Ka) with the holes in the edge of the End
Platform Assembly (Ja) see Figures 1 and 1a.
Fig. 1
Ka
Ja
Fig. 1a
Unfolded
Platform
carton
P
