1115DUETd Addison Small 3-Drawer Nightstand
1116DUETd Addison 3-Drawer Nightstand
Assembly Instructions
1115DUETd_1116DUETd — Page 3 — 04/20
Tool Required: Phillips Screwdriver.
Tool Provided: Leveler Adjustment Key in the Zip bag taped to the Owner’s Manual and Safety
Guide.
1. Remove screws from the plywood supports and side aprons. Recycle or discard. See Figure 1.
2. Place the unit at its final destination. Use the Leveler Adjustment Key (ZC), found in the Zip bag
taped to the Owner’s Manual and Safety Guide to rotate the Slotted Levelers (ZB) on the
bottoms of the legs until the unit is level. See Figures 2 and 2a.
Fig. 1
Plywood Supports
Fig. 2
Loose
Tight
ZB
ZB
ZB
Fig. 2a
ZC
Fig. 1
