3800DUETa Addison Queen Adjustable Headboard Platform Bed
3804DUETa Addison King Adjustable Headboard Platform Bed
3807DUETa Addison Cal-King Adjustable Headboard Platform Bed
Assembly Instructions
This assembly requires two people.
3800DUETa_3804DUETa_3807DUETa
— Page 5 — 04/19
Tools Required:
Phillips screwdriver, 7/16" open end or box end wrench.
Tool Provided:
Z shaped Hex Wrench attached to the back right leg of the Headboard. See
Figure 8b.
NOTE:
Remove this instruction from the Headboard Kit carton. Place Headboard and attached
hardware kit to the side (possibly in another room) to allow space for assembling the platform
portion of the bed. Open the #3803 Platform Connector Kit, which attaches the two Platforms
together.
1.
Open and unfold the Platform Kit carton in the approximate location where the bed will be
placed. This will help protect the flooring and the faces of the platform components. Place the
Headboard Platform Assembly (Ka) face down in the approximate location where the headboard
will be located with the inside edge facing the End Platform Assembly (Ja). Align the Dowels (P)
in the edge of the Headboard Platform Assembly (Ka) with the holes in the edge of the End
Platform Assembly (Ja) see Figures 1 and 1a.
Fig. 1
Ka
Ja
Fig. 1a
Unfolded
Platform
carton
P
